|
Injection
Moulded Thermoplastic Rubbers
To complement the service we offer with our heat vulcanised rubbers, we are also able to supply a range of Injection Moulded Thermoplastic
Rubbers. The use of this type of material is growing in popularity
and can be cost effective even when larger volume production
is not required.
|
| SANTOPRENE |
|
Working
Temperature Range.
|
-40
°C to +140 °C |
Developed
as an alternative to EPDM, Butyl or Natural Rubber.
Grades available for use in the Food and Drinks Industries.
F.D.A. compliant grades can be steam sterilised. |
|
| EVOPRENE |
| Working
Temperature Range |
-40
°C to +140 °C |
| Excellent
Ozone and U.V. resistance. |
| F.D.A.compliant
grades available. |
| This
is a non marking material. |
|
| GEOLAST |
| Working
Temperature Range. |
-50
°C to +100 °C |
| Developed
as an alternative to Nitrile Rubber. |
| Used
for Hydraulic and Pneumatic Seals. |
| Can
be used with Brake and Clutch Fluids. |
|
| POLYURETHANE |
| Standard
material has working temperature range. |
-50
°C to +80 °C |
| Excellent
abrasion resistance, flex life and elasticity. |
| Resistant
to many chemicals, oils and solvents. |
| Used for Hydraulic and Pneumatic Seals. |
|
| HYTREL |
| Offered
as an alternative to Polyurethane when higher temperature resistance
(up to +130 °C) or F.D.A. compliance is required. |
|
|
|
|
